LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | WDECT2315 |
| Manufacturer | |
| Recovered from | Uniden WDECT2315 phone |
| Board IDs | PE-1917AB |
| LCD type | positive |
| Polarizer type | transflective |
| Columns | 16 |
| Rows | 3 |
| Char matrix | 5×7 |
| Driver IC | (CoG) |
| Backlight | - |
| Arduino driver | |
| Connector | pins |
| Num Pins | 8 |
| Pin spacing | 2mm |
| Connector pin-out | |||
|---|---|---|---|
| Pin# | Label | Measured | Notes |
| 1 | CS | 3.24v | pulses low |
| 2 | MOSI | pulses low/high | |
| 3 | CLK | 3.24v | pulses low similar to #1 |
| 4 | RS | 3.24v | pulses low/high similar to #2 |
| 5 | RESET | 3.24v | steady hi? |
| 6 | Vcc | 3.24v | |
| 7 | GND | 0.03v | |
| 8 | -2.65v | ||
vcc3.3v
Datasheets
Examples :
electronic/lcd/wdect2315.1661369039.txt.gz · Last modified: 2022/08/24 19:23 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International