key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
| LCD Description | |
|---|---|
| Model | VIP89Z G-Code scanner |
| Manufacturer | Gemstar |
| Recovered from | G-Code scanner |
| Board IDs | V.UF10E 1EC004090 |
| LCD type | |
| Polarizer type | |
| Columns | 2 numerals, 11 alphanumeric |
| Rows | 1 |
| Char matrix | |
| Driver IC | Gemstar-350 9241KX009 |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex cable |
| Num Pins | 36 |
| Pin spacing | 0.05” |
| Connector pin-out | Arduino test rig | ||
|---|---|---|---|
| Pin# | Label | Description | Pin |
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| 8 | |||
| 9 | |||
| 10 | |||
| 11 | |||
| 12 | |||
| 13 | |||
| 14 | |||
| 15 | |||
| 16 | |||
| 17 | |||
| 18 | |||
| 19 | |||
| 20 | |||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | |||
| 25 | |||
| 26 | |||
| 27 | |||
| 28 | |||
| 29 | |||
| 30 | |||
| 31 | |||
| 32 | |||
| 33 | |||
| 34 | |||
| 35 | |||
| 36 | |||
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported