LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | WDECT2315 |
| Manufacturer | |
| Recovered from | Uniden WDECT2315 phone |
| Board IDs | |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 |
| Rows | 3 |
| Char matrix | 5×7 |
| Driver IC | (CoG) |
| Backlight | - |
| Arduino driver | |
| Connector | pins |
| Num Pins | 8 |
| Pin spacing | 2mm |
| Connector pin-out | Arduino test rig | |||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | 3.24v | pulses low | ||
| 2 | pulses low/high | |||
| 3 | 3.24v | pulses low similar to #1 | ||
| 4 | 3.24v | pulses low/high similar to #2 | ||
| 5 | 3.24v | steady hi? | ||
| 6 | 3.24v | |||
| 7 | GND | 0.03v | ||
| 8 | -2.65v | |||
vcc3.3v
Examples :
electronic/lcd/wdect2315.1556052190.txt.gz · Last modified: 2019/04/23 20:43 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International