LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | g7A145, L303646 |
| Manufacturer | |
| Recovered from | Brother FAX-2820 |
| Board IDs | |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 |
| Rows | 1 |
| Char matrix | 5×8 |
| Driver IC | |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex cable |
| Num Pins | 6 |
| Pin spacing | 1mm |
| Connector pin-out | Arduino test rig | |
|---|---|---|
| Pin# | Label | Pin |
| 1 | Data | D9 |
| 2 | SCK | D5 |
| 3 | STB | D4 |
| 4 | V0 | Contrast adjustment 1) |
| 5 | Vdd | +5V |
| 6 | Vss | GND |
Examples :
1)
connect to potentiometer between +5V and GND
electronic/lcd/g7a145.1574762560.txt.gz · Last modified: 2019/11/26 10:02 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International