key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | c7G045 |
| Manufacturer | |
| Recovered from | Panasonic KX-T7730 1) |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 |
| Rows | 1 |
| Char matrix | 5×8 |
| Driver IC | Hitachi HD44780 compatible (CoG) |
| Backlight | - |
| Arduino driver | LiquidCrystal_SPI |
| Connector | PCB flex cable 2) |
| Num Pins | 6 |
| Pin spacing | 1mm |
| Connector pin-out | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | - | LDATA | ||
| 2 | - | LCDCK | ||
| 3 | - | STB | ||
| 4 | - | GND | ||
| 5 | - | +5V | ||
| 6 | - | GND | ||
Pin 6 may actually be a control line tied low.
Same connector as 2L723, different physical size LCD but interchangeable.
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International