LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
LCD Description |
|
|---|---|
| Model | c7G045 |
| Manufacturer | |
| Recovered from | Panasonic KX-T7730 1) |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | 16 |
| Rows | 1 |
| Char matrix | 5×8 |
| Driver IC | mounted on LCD glass (CoG) |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex cable |
| Num Pins | 6 |
| Pin spacing | 1mm |
| Arduino test rig 2) | ||||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | - | LDATA | ||
| 2 | - | LCDCK | ||
| 3 | - | STB | ||
| 4 | - | GND | ||
| 5 | - | +5V | ||
| 6 | - | GND | ||
One of the GND pins may actually be a control line tied low.
Datasheets
- LCD initialisation sequence that works for this LCD. So pinout and controller are compatible.
—-
Examples :
electronic/lcd/c7g045.1539646000.txt.gz · Last modified: 2018/10/15 23:26 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International