LCD module data
Numeric
Character
Mixed
- ≡ Uniden FP203 ✘
- ≡ Uniden FP204 ✘
- ≡ VIP89Z G-Code ✘
Graphic
key: ≡ parallel, ↔ serial, ~ LVDS, _ unknown, ✘ discarded as not useful
Resources
This is an old revision of the document!
| LCD Description | |
|---|---|
| Model | G932D |
| Manufacturer | Brother |
| Recovered from | Brother MFC9840CDW1) |
| Board IDs | B53K922-2, 9J01B, LG7304001 |
| LCD type | positive |
| Polarizer type | reflective |
| Columns | |
| Rows | |
| Char matrix | |
| Driver IC | |
| Backlight | - |
| Arduino driver | |
| Connector | PCB flex cable |
| Num Pins | 20 |
| Pin spacing | 1mm |
| Module size | 76mm x 34mm |
| Connector pin-out | Arduino test rig | |||
|---|---|---|---|---|
| Pin# | IC pin | Label | Pin | colour |
| 1 | VSS | |||
| 2 | CS1 | |||
| 3 | RESET | |||
| 4 | A0 | |||
| 5 | D6 | |||
| 6 | D7 | |||
| 7 | CDD | |||
| 8 | VSS | |||
| 9 | VOUT | |||
| 10 | CAP3- | |||
| 11 | CAP1+ | |||
| 12 | CAP1- | |||
| 13 | CAP2- | |||
| 14 | CAP2+ | |||
| 15 | V1 | |||
| 16 | V2 | |||
| 17 | V3 | |||
| 18 | V4 | |||
| 19 | V5 | |||
| 20 | VDD | |||
Examples :
electronic/lcd/b53K9222.1610492945.txt.gz · Last modified: 2021/01/12 23:09 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International