Stepper motor data
Small
Square
Round
Ben Wirz archive
Casa archive
Resources
This is an old revision of the document!
| Stepper Description | ||
|---|---|---|
| Model | STP-42D0009 | |
| Manufacturer | - | |
| Drive method | bipolar | |
| Number of phases | 2 | |
| Winding colours | blue-grey, grey-grey | |
| Step angle | °/step | 1.8 |
| Voltage | V | - |
| Current | A/phase | - |
| Winding resistance | ohm/phase | 1.5 |
| Inductance | mH/phase | - |
| Holding torque | mN*m | - |
| Detent torque | mN*m | - |
| Rotor inertia | g*cm*cm | - |
| Height | mm | 28 |
| Width | mm | 43 (Nema17) |
| Shaft length | mm | 7 |
| Shaft diameter | mm | 5 |
| Weight | g | - |
| Insulation Class | - | |
| Insulation resistance | - | |
| Dielectric strength | - | |
| Operating temperature range | °C | - |
| Allowable temperature rise | ° | - |
Examples
electronic/actuator/stepper/stp42d0009.1659513542.txt.gz · Last modified: 2022/08/03 07:59 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International