Stepper motor data
Small
Square
Round
Ben Wirz archive
Casa archive
Resources
This is an old revision of the document!
| Stepper Description | ||
|---|---|---|
| Model | KP39HM2-028 FMD0098184 | |
| Manufacturer | Matsushita | |
| Drive method | bipolar | |
| Number of phases | 2 | |
| Winding colours | red-blue, white-yellow | |
| Step angle | °/step | 1.8 |
| Voltage | V | 12 |
| Current | A/phase | 0.08 |
| Winding resistance | ohm/phase | 145 |
| Inductance | mH/phase | - |
| Holding torque | mN*m | - |
| Detent torque | mN*m | - |
| Rotor inertia | g*cm*cm | - |
| Dimensions | (not including shaft) | Shaft |
| Length | 32mm | 14mm |
| Width | 39mm (Nema15) | 5mm |
| Weight | g | - |
| Insulation Class | - | |
| Insulation resistance | - | |
| Dielectric strength | - | |
| Operating temperature range | °C | - |
| Allowable temperature rise | ° | - |
Examples
Recovered from unknown equipment :
electronic/actuator/stepper/kp39hm2028.1659481521.txt.gz · Last modified: 2022/08/02 23:05 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International