This is an old revision of the document!
Published 15 Mar 2023
XC4544 Music Shield
| Shield Description | |
|---|---|
| Model | XC4544 Music Shield v1.2 |
| Manufacturer | made in China |
| Brand | Duinotech |
| Clone of | http://seeeddoc.github.io/Music_Shield_V1.0/ |
| Other designations | |
| Arduino compatibility | Uno |
| Type | Music player and recorder |
| Voltage | 5V |
| Current | |
| Software | xc4544-softwaremain.zip |
| Arduino pin usage | |
|---|---|
| Pin | Shield function |
| A0 | |
| D0 | |
Overview
A music player and recorder.
Features
- Headphone/line out socket for playback into 16 ohm or 32 ohm earphone
- Line in socket for recording
- Red LED shows playback volume
- Green LED shows Play/Pause, blinks when playing
- MicroSD card slot, FAT16 or FAT32 format up to 2GB
- Volume up and down buttons
- Multifunction control. Previous/next song. Or press to pause or resume.
- Capable reading a variety of formats including MP3, WAV, MIDI, OGG Vorbis
- Pins on Arduino board can be assigned for various music control
- I2S and GPIO for digital audio output.
- ISP interface is kept for bringing SPI port when using with Mega.
Schematics
Examples
References and Additional Resources
electronic/boards/shield/xc4544.1792390640.txt.gz · Last modified: 2026/10/19 06:17 by tony
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International