My Projects

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
electronic:actuator:stepper:kp4m4001 [2020/03/18 18:10] – created tonyelectronic:actuator:stepper:kp4m4001 [2026/09/22 20:32] (current) – tony
Line 2: Line 2:
 ^  Stepper Description  ||| ^  Stepper Description  |||
 ^Model| |**KP4M4-001**, 966000-001| ^Model| |**KP4M4-001**, 966000-001|
-^Manufacturer| |Tandon| +^Manufacturer| |Tandon (also made by Japan Servo Motors)| 
-^Drive method| |-| +^Recovered from| |[[:electronic:equipment:fdd:tm100|Tandon TM100-2A]]| 
-^Number of phases| |-|+^Drive method| |unipolar| 
 +^Number of phases| |4|
 ^Winding colours| |-| ^Winding colours| |-|
-^Step angle|(deg)/step|-| +^Step angle|(deg)/step|3.6| 
-^Voltage|V|-|+^Voltage|V|12|
 ^Current|A/phase|0.15| ^Current|A/phase|0.15|
 ^Winding resistance|ohm/phase|75| ^Winding resistance|ohm/phase|75|
Line 14: Line 15:
 ^Detent torque|mN*m|-| ^Detent torque|mN*m|-|
 ^Rotor inertia|g*cm*cm|-| ^Rotor inertia|g*cm*cm|-|
-^Weight|g|-|+^Height|mm|42| 
 +^Width|mm|42 (Nema 17)| 
 +^Shaft length|mm|27| 
 +^Shaft diameter|mm|5| 
 +^Weight|g|268|
 ^Insulation Class| |-| ^Insulation Class| |-|
 ^Insulation resistance| |-| ^Insulation resistance| |-|
Line 20: Line 25:
 ^Operating temperature range|(deg)C|-| ^Operating temperature range|(deg)C|-|
 ^Allowable temperature rise|(deg)|-| ^Allowable temperature rise|(deg)|-|
 +
  
 \\ \\
-==== Examples ====+---- 
 +===== Examples ===== 
 +See https://web.archive.org/web/20080212133818/https://www.doc.ic.ac.uk/~ih/doc/stepper/kp4m4/
  
 {{:electronic:stepper:.jpg?800|KP4M4-001}} {{:electronic:stepper:.jpg?800|KP4M4-001}}