My Projects

You are here: start » electronic » lcd » geb2294v0

My Projects

User Tools

Site Tools

You are here: start » electronic » lcd » geb2294v0

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
electronic:lcd:geb2294v0 [2018/04/08 16:28] – tonyelectronic:lcd:geb2294v0 [2026/09/26 07:53] (current) – tony
Line 1: Line 1:
-^Manufacturer|| +{{ :arduino:uPD7228:P1286800a.jpg?200|GEB 2294V-0 PC-B2011-03 μPD7228}} 
-^Model|GEB 2294V-0 PC-B2011-03 μPD7228|+^  LCD Description  || 
 +^Model|**GEB 2294V-0 PC-B2011-03 μPD7228**| 
 +^Manufacturer|Matsushita|
 ^Recovered from| | ^Recovered from| |
 +^LCD type|positive|
 +^Polarizer type|reflective|
 ^Columns|20| ^Columns|20|
 ^Rows|2| ^Rows|2|
Line 10: Line 14:
 ^Connector| | ^Connector| |
 ^Num Pins|13| ^Num Pins|13|
-^Pin spacing|0.08|+^Pin spacing|0.08"|
  
-^ ^^^Arduino test rig ((reminder for my personal testing, not useful for anyone else!))||+^  Connector pin-out  ^^^  Arduino test rig ((reminder for my personal testing, not useful for anyone else!))  ||
 ^Pin#^IC pin^Label^Pin^colour| ^Pin#^IC pin^Label^Pin^colour|
-^1|41|clock| +^1|41|clock|d9|orange| 
-^2|40|reset| +^2|40|reset|d6|red| 
-^3|39|cs'| +^3|39|cs'|d3|brown| 
-^4|36|c/d'| +^4|36|c/d'|d4|black| 
-^5|35|stb'/sck'| +^5|35|stb'/sck'|d2|white| 
-^6|32|busy'| +^6|32|busy'|d5|grey| 
-^7|30|d3| +^7|30|d3|d13|purple| 
-^8|29|d2| +^8|29|d2|d12|blue| 
-^9|28|d1| +^9|28|d1|d11|green| 
-^10|27|d0| +^10|27|d0|d10|yellow| 
-^11| 21((via 465Ω))|vlc5| +^11| 21((via 465Ω))|vlc5|d6 ((via 1.2kΩ))|orange| 
-^12|34|vss|gnd|| +^12|34|vss|gnd|brown| 
-^13|33|vdd|vcc||+^13|33|vdd|vcc|red| 
 + 
 +Compatible with [[:electronic:lcd:mgcs|MGCS μPD7228]], except socket CNJ9 transposed, can use same wired plug if keyed ridges removed and plugged in backwards. 
 + 
 +Edge connectors CNJ61 and CNJ62 are interconnected but not connected to the rest of the circuit.
  
-Compatible with [[:electronic:lcd:mgcs|MGCS μPD7228]], except socket transposed, can use same wired plug if keyed ridges removed and plugged in backwards. 
 \\ \\
 +----
 +===== Examples =====
  
-{{arduino:uPD7228:P1286800a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228}}+{{arduino:uPD7228:P1286800a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228 front}}
  
-{{arduino:uPD7228:P1286799a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228}}+{{arduino:uPD7228:P1286799a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228 back}}
  
-{{arduino:uPD7228:P1286802a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228}}+{{arduino:uPD7228:P1286802a.jpg?300|GEB 2294V-0 PC-B2011-03 μPD7228 connector}}
  
-{{arduino:uPD7228:P2016882a.jpg?800|GEB 2294V-0 PC-B2011-03 μPD7228}}+{{arduino:uPD7228:P2016882a.jpg?400|GEB 2294V-0 PC-B2011-03 μPD7228 examples}}
  

Page Tools

electronic/lcd/geb2294v0.1523204925.txt.gz · Last modified: 2018/04/08 16:28 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International