Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| electronic:lcd:g7a145 [2026/09/01 09:33] – tony | electronic:lcd:g7a145 [2026/09/26 05:29] (current) – tony | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | {{ : | ||
| + | ^ LCD Description | ||
| + | ^Model|**L303646**, | ||
| + | ^Manufacturer|| | ||
| + | ^Recovered from|Brother FAX-2820| | ||
| + | ^Board IDs|| | ||
| + | ^LCD type|positive| | ||
| + | ^Polarizer type|reflective| | ||
| + | ^Columns|16| | ||
| + | ^Rows|1| | ||
| + | ^Char matrix|5x8| | ||
| + | ^Driver IC|Hitachi HD44780 compatible (CoG)| | ||
| + | ^Backlight|-| | ||
| + | ^Arduino driver|[[: | ||
| + | ^Connector|PCB flex cable| | ||
| + | ^Num Pins|6| | ||
| + | ^Pin spacing|1mm| | ||
| + | ^Module size|55 x 20mm| | ||
| + | |||
| + | ^ Connector pin-out | ||
| + | ^Pin# | ||
| + | ^1|Data|D9| | ||
| + | ^2|SCK|D5| | ||
| + | ^3|STB|D4| | ||
| + | ^4|V0|Contrast adjustment ((connect to potentiometer between +5V and GND))| | ||
| + | ^5|Vdd|+5V| | ||
| + | ^6|Vss|GND| | ||
| + | |||
| + | LCDs with the same cable and controller - [[: | ||
| + | |||
| + | (NB the display is upside down (ie rotated 180 degrees) compared to other LCDs with the same cable number ID, L303646.) | ||
| + | |||
| + | \\ | ||
| + | ---- | ||
| + | ===== Examples ===== | ||
| + | |||
| + | {{: | ||
| + | / | ||
| + | / | ||
| + | |||
| + | {{: | ||
| + | |||
| + | {{: | ||
| + | |||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | {{: | ||
| + | |||
| + | {{: | ||
| + | / | ||
| + | / | ||
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International