This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| electronic:lcd:g7a145 [2019/11/26 10:01] – tony | electronic:lcd:g7a145 [2026/09/26 05:29] (current) – tony | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | {{ : | + | {{ : |
| ^ LCD Description | ^ LCD Description | ||
| - | ^Model|**g7A145**, L303646| | + | ^Model|**L303646**, g7A145| |
| ^Manufacturer|| | ^Manufacturer|| | ||
| ^Recovered from|Brother FAX-2820| | ^Recovered from|Brother FAX-2820| | ||
| Line 10: | Line 10: | ||
| ^Rows|1| | ^Rows|1| | ||
| ^Char matrix|5x8| | ^Char matrix|5x8| | ||
| - | ^Driver IC|| | + | ^Driver IC|Hitachi HD44780 compatible (CoG)| |
| ^Backlight|-| | ^Backlight|-| | ||
| - | ^Arduino driver|| | + | ^Arduino driver|[[: |
| ^Connector|PCB flex cable| | ^Connector|PCB flex cable| | ||
| ^Num Pins|6| | ^Num Pins|6| | ||
| ^Pin spacing|1mm| | ^Pin spacing|1mm| | ||
| + | ^Module size|55 x 20mm| | ||
| - | ^ Connector pin-out | + | ^ Connector pin-out |
| - | ^Pin#^IC pin^Label^Pin^colour| | + | ^Pin# |
| - | ^1| | + | ^1|Data|D9| |
| - | ^2| | + | ^2|SCK|D5| |
| - | ^3| | + | ^3|STB|D4| |
| - | ^4| | + | ^4|V0|Contrast adjustment ((connect to potentiometer between +5V and GND))| |
| - | ^5| | + | ^5|Vdd|+5V| |
| - | ^6| | + | ^6|Vss|GND| |
| - | Probably same pinout as [[: | + | |
| - | \\ | + | |
| - | \\ | + | |
| + | LCDs with the same cable and controller - [[: | ||
| + | |||
| + | (NB the display is upside down (ie rotated 180 degrees) compared to other LCDs with the same cable number ID, L303646.) | ||
| + | |||
| + | \\ | ||
| ---- | ---- | ||
| - | ===== Examples | + | ===== Examples ===== |
| - | {{: | + | {{: |
| - | |{{: | + | /*{{: |
| - | |{{: | + | /*{{: |
| {{: | {{: | ||
| Line 57: | Line 60: | ||
| {{: | {{: | ||
| - | |{{: | + | /*{{: |
| - | |{{: | + | /*{{: |