Differences

This shows you the differences between two versions of the page.

--- electronic:lcd:c7g045 [2019/11/26 18:41] – tony
+++ electronic:lcd:c7g045 [2026/09/26 05:44] (current) – [Datasheets] tony
@@ Line 17: / Line 17: @@
 ^Module size|75 x 25mm|
-^  Connector pin-out  ||^  Arduino test rig |
+^  Connector pin-out  ^^  Arduino test rig  |
-^Pin#^Label^Description ^Pin|
+^Pin#^Label^Pin|
-^1|LDATA|
+^1|Data|D9|
-^2|LCDCK|
+^2|SCK|D5|
-^3|STB|
+^3|STB|D4|
-^4|GND|
+^4|V0|Contrast adjustment ((connect to potentiometer between +5V and GND))|
-^5|+5V|
+^5|Vdd|+5V|
-^6|GND|
+^6|Vss|GND|
-Pin 4 is probably V0, contrast adjustment, normally wired to a pot between +5V and GND.
-\\
-\\
-Same connector as [[:electronic:lcd:b53K4631|2L723]], different physical size LCD but interchangeable.
+LCDs with the same cable and controller - [[:electronic:lcd:g7a145]] (orientation rotated 180degrees), [[:electronic:lcd:b53K4631]], [[:electronic:lcd:a0L028]], [[:electronic:lcd:b53K4671]], [[:electronic:lcd:c7g045]] (larger)
-====Datasheets====
+----
+==== Additional info ====
   * {{electronic:lcd:brother_fax645_lcd.pdf|LCD initialisation sequence that works for this LCD}}
   * {{electronic:lcd:brother_fax645-poweron.sr|LCD initialisation sequence in sigrok format}}
+\\
 ----
+===== Examples =====
-===== Examples : =====
 {{:electronic:lcd:p8250907a.jpg?800|c7G045 front}}

My Projects