My Projects

You are here: start » electronic » boards » arduino » unosmdclone

My Projects

User Tools

Site Tools

You are here: start » electronic » boards » arduino » unosmdclone

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
electronic:boards:arduino:unosmdclone [2026/10/21 04:30] – tonyelectronic:boards:arduino:unosmdclone [2026/10/22 21:00] (current) – [Schematics] tony
Line 10: Line 10:
 ^Clone of|Arduino Uno R3 SMD| ^Clone of|Arduino Uno R3 SMD|
 ^Description|Standard Uno using SMD cpu| ^Description|Standard Uno using SMD cpu|
-^Associated modules| | 
 ^Voltage|5V| ^Voltage|5V|
-^Current| | 
  
 ===== Overview ===== ===== Overview =====
 +This is a budget no-name Arduino Uno SMD clone with an CH340G USB interface rather than an ATmega16U2.  I also note both the genuine Arduino Uno SMD and this one use a ceramic resonator instead of a more precise and stable 16MHz crystal oscillator.  My example had a very crookedly mounted USB-B socket, and when I tried to resolder it flat onto the board it shorted something, disabling the USB port - so had to undo my fix :-(, and put up with it pressing on the underside of any Arduino shield mounted above.
 +
 +So a cheap Arduino Uno clone for applications not requiring precise timing or expectations of longevity :-).
  
 ===== Features  ===== ===== Features  =====
-  *+  * Microcontroller: ATmega328P 
 +  * Clock Speed: 16 MHz ceramic resonator 
 +  * 14 digital input/output pins (6 can be PWM outputs) 
 +  * 6 analog inputs 
 +  * Operating Voltage: 5V 
 +  * Input Voltage: 7-12V 
 +  * 3.3V Power Out: up to 50 mA 
 +  * I/O Pin Out: up to 20 mA 
 +  * Digital I/O Pins: 14 (6 support PWM output) 
 +  * Analog Input Pins: 6 (with 10-bit resolution) 
 +  * Flash Memory: 32 kB (2kB used by bootloader) 
 +  * SRAM: 2 kB 
 +  * EEPROM: 1 KB 
 +  * Serial I/O: 4 UARTs, one SPI and one I2C interface
  
 \\ \\
 ---- ----
 ===== Schematics ===== ===== Schematics =====
-{{electronic:boards:arduino:a000066-schematics.png?800|Arduino UNO schematic}}+/* {{electronic:boards:arduino:uno_pighixxx.png?800|Pinout (unofficial)}} ((from https://web.archive.org/web/20171110175921/http://www.pighixxx.com/test/wp-content/uploads/2014/11/uno.png CCBYSA Alberto Piganti)) 
 +{{electronic:boards:arduino:a000066-pinout.png?800|Pinout}} ((from https://docs.arduino.cc/resources/pinouts/A000066-full-pinout.pdf CCBYSA Arduino.cc)) */ 
 +{{electronic:boards:arduino:arduino-uno-rev-3-smd-clone-pinout-high-resolution.png?800|Pinout}} ((from https://mischianti.org/arduino-uno-rev-3-ch340-smd-clone-high-resolution-pinout-datasheet-and-specs/ CCBYNCND mischianti.org)) 
 +{{electronic:boards:arduino:ch340g_uno_arduinoboard_3a_bw.png?800|Arduino UNO schematic}} ((from https://www.mikrocontroller.net/attachment/258727/CH340G_UNO_ArduinoBoard_3.pdf CCBYSA))
  
-{{electronic:boards:arduino:a000066-pinout.png?800|Pinout}}+Seems to be the same as this schematic but an MIC5205-3.3YM5 (labelled KB33 on a SOT-23-5 SMD chip) has been substituted for the LP2985-33 LDO regulator.
 \\ \\
 ---- ----
Line 35: Line 52:
 {{electronic:boards:arduino:pa204427a.jpg?800|Uno SMD clonebottom view}} {{electronic:boards:arduino:pa204427a.jpg?800|Uno SMD clonebottom view}}
  
-^Genuine Arduino Uno R3 SMD :^ +\\ 
-{{electronic:boards:arduino:arduino_uno_microcontroller.jpg?800|Genuine Arduino Uno R3 SMD top view}}((from https://commons.wikimedia.org/wiki/File:Arduino_UNO_microcontroller.jpg CCBYSA Alyona Makarenko))+---- 
 +^Genuine Arduino Uno R3 SMD  :^ 
 + 
 +/* {{electronic:boards:arduino:arduino_uno_microcontroller.jpg?800|Genuine Arduino Uno R3 SMD top view}}((from https://commons.wikimedia.org/wiki/File:Arduino_UNO_microcontroller.jpg CCBYSA Alyona Makarenko)) */ 
 +{{electronic:boards:arduino:arduinounosmd.jpg?800|Genuine Arduino Uno R3 SMD top view}} ((from http://arduino.cc/en/uploads/Main/ArduinoUnoSmd.jpg CCBYSA arduino.cc))
  
 ====== References and Additional Resources ====== ====== References and Additional Resources ======
-  * [[https://docs.arduino.cc/hardware/uno-rev3/|Arduino UNO docs]] +  * {{https://mischianti.org/wp-content/uploads/2023/11/Arduino-UNO-Rev-3-CH340-SMD-clone-manual.pdf|A Uno SMB clone manual}} 
-  * {{https://docs.arduino.cc/resources/pinouts/A000066-full-pinout.pdf|Pinout details}} +  * [[https://docs.arduino.cc/hardware/uno-rev3-smd|Arduino UNO SMD docs (genuine version)]] 
-  * {{https://docs.arduino.cc/resources/schematics/A000066-schematics.pdf|Schematic}}+  * {{https://docs.arduino.cc/resources/pinouts/A000066-full-pinout.pdf|Pinout details (genuine version)}} 
 +  * {{https://docs.arduino.cc/resources/schematics/A000066-schematics.pdf|Schematic (genuine version)}}
  
 <html><small><p>If any referenced page no longer exists, try looking for its URL on <a href="http://archive.org">http://archive.org</a>.</p></small></html> <html><small><p>If any referenced page no longer exists, try looking for its URL on <a href="http://archive.org">http://archive.org</a>.</p></small></html>

Page Tools

electronic/boards/arduino/unosmdclone.1792557017.txt.gz · Last modified: 2026/10/21 04:30 by tony
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International